Toyota 4wd Transfer Case Service | 4Runner | Tacoma | Drain & Fill DIY (5th Gen Manual Shift 4x4)

In this video, we walk you through the step-by-step process of performing a transfer case drain and fill on a 5th Gen Toyota 4Runner with the manual shift 4x4 transfer case. Whether you're maintaining your rig for daily driving or prepping for off-road adventures, keeping your transfer case fluid fresh is key to drivetrain longevity.

Fluid capacity = 1.1 Quarts (Proper fluid level 0 to .5 mm from bottom lip of fill hole) Plugs are 24 mm and torque to 27 ft-lb or 324 in-lb (1 ft-lb = 12 in-lb so 12x27=324) Proper aluminum crush washer gasket part number is 90430-A0003 and you need 2. 18mm inside diameter with a 245mm outside diameter. See kit below.

We use Amazon Affiliate links whenever possible, which means I may earn a small commission if you decide to grab your parts through the links below. It doesn’t cost you anything extra—just helps keep the lights on and the wrenches spinning!

Transfer case and differential washer service kit https://amzn.to/3JNveuo

Toyota 4wd Transfer Case Service